





240 × 150 × 60 mm, and most of that stack is taken out of the middle. The relief channel runs the full length of the saddle — through the cover, through the carbon shell — so the soft tissue never sits on a bridge. The underside is left as finished carbon: a 2 × 2 twill weave under clear gloss, with the rail yoke moulded into the shell instead of riveted onto a plastic base. Wing panels carry a dense pin-hole matrix that thins out towards the rear rim, and moulded seam lines split each wing into two zones so the shell can flex where the sit bones load it. The rail loop fixes at three points — two rear blocks and a nose yoke — and the clamp zone is textured so the post clamp bites without over-torquing.
Everything below is what we build to by default. Tolerances, finish and packaging can all be changed for an OEM project.

Standard terms are below. Volume projects and private-label programmes are quoted individually.
Mixed models can be consolidated into one container and one document set.
Send us your quantity and destination port. We reply within one working day with unit price, MOQ confirmation, packing details and a production date.